Bearing on concrete to ACI 318-19 22.8
Bearing of plates and members on pedestals, walls and footings with the frustum area increase.
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished bearing on concrete calculation
The applicable checks, step by step
Every check to ACI 318-19 22.8 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the bearing on concrete is tested
Against published examples and hand calculations from the code equations, on every change. The method and the sources.
Learn
Step by step
User manual: Bearing on concrete
Every input, check and option of the calculation explained.
Video: Concrete: a simply supported beam
A 16 by 26 in. beam: why you read every row and not only the status bar, and what a stirrup spacing past its limit does. (1:42)
More concrete calculations
Run your next bearing on concrete calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.