Cold-formed steel floor vibration to AISC Design Guide 11
Walking vibration of cold-formed steel joist floors with a slab on deck or sheathing: frequency, effective weight and the low- and high-frequency response against your limits (AISC Design Guide 11).
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished cold-formed steel floor vibration calculation
The applicable checks, step by step
Every check to AISC Design Guide 11 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the cold-formed steel floor vibration is tested
Against hand calculations from the code equations, on every change. The method and the sources.
Learn
Step by step
User manual: Cold-formed steel floor vibration
Every input, check and option of the calculation explained.
Video: Cold-formed steel: a wall stud
A 600S162-54 stud under axial load and wind, with the web holes set by you: unpunched, then punched. (1:39)
More cold-formed steel calculations
Run your next cold-formed steel floor vibration calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.