Cold-formed steel sloped and mansard wall to AISI S100-16, ASCE 7-22
Sloped wall and mansard studs as beam-columns under wind, snow and dead load, with an optional kicker and the screws at the roof and floor (AISI S100-16, ASCE 7-22).
No card needed. 30 days free, every calculation type.
What you get
From the inputs to a finished cold-formed steel sloped and mansard wall calculation
The applicable checks, step by step
Every check to AISI S100-16, ASCE 7-22 with its equation, the values that go into it, the result and the code section, and the governing case up front. Results update as you type.
A calculation report a reviewer can follow
Inputs, load combinations, every check with its result and reference, and the governing case, in a clear PDF with your title block.
Drawings
Where the calculation has a shape to draw: elevations, sections and the diagrams, on a sheet with your title block, as PDF or DXF.
Your units, your method
US or metric units at any time, LRFD or ASD where the code offers both; the report follows.
Verification
How the cold-formed steel sloped and mansard wall is tested
Against hand calculations from the code equations, on every change. The method and the sources.
Learn
Step by step
User manual: Cold-formed steel sloped and mansard wall
Every input, check and option of the calculation explained.
Video: Cold-formed steel: a wall stud
A 600S162-54 stud under axial load and wind, with the web holes set by you: unpunched, then punched. (1:39)
More cold-formed steel calculations
Run your next cold-formed steel sloped and mansard wall calculation today
Free for 30 days, then $45 a month or $400 a year per user. Nothing to install.
ILX Studio, LLC is not affiliated with or endorsed by AISC, ACI, AWC, TMS, AISI, ASCE or any other code organization.